• HEAT-CURED COATINGS

    SÄKAPHEN® heat-cured coatings offer high-end corrosion protection against all sorts of aggressive mediums. SÄKAPHEN® guarantees excellent protection against strongly acidic and strongly alkaline mediums, especially at high temperatures. SÄKAPHEN® heat...
  • COLD-CURED COATINGS

    SÄKAPHEN® catalytic two-component coatings offer excellent protection against aggressive acidic and alkaline chemicals at up to 100°C in wet conditions and at even higher temperatures in dry conditions. SÄKAPHEN® catalytic...
  • Surface Treatment

    Due to their excellent product quality when it comes to coatings, SÄKAPHEN® was commissioned to develop a truly effective cleaning system for high voltage insulators...



  • ISO Tank Container

    SÄKAPHEN® coats insulated ISO Tank containers and big process vessels with approved SÄKAPHEN® heat cured coatings...




  • SÄKAPHEN® - OUR COMPANY

    SÄKAPHEN® is a 3rd generation family-owned company which stands for excellent quality and premium coating systems. SÄKAPHEN® distinguishes itself through its individual coating solutions for customer-specific requirements. The SÄKAPHEN® cleaning system completes the product range.

    Read More
  • 1
  • 1
  • SÄKAPHEN® - OUR LABORATORY

    The SÄKAPHEN® laboratory continuously carries out resistance tests, refines its coating materials and develops new products. SÄKAPHEN® therefore stands for excellent quality in corrosion protection since 1954.



    Read More
  • 1
  • SÄKAPHEN® - TECHNICAL SUPPORT

    Competent SÄKAPHEN® expert advisers will help you to find a solution to the challenges you face when it comes to corrosion protection. The SÄKAPHEN® laboratory will carry out appropriate resistance tests to provide a tailor-made solution for both the coating material and the application solution.
    Read More
  • 1

A few application examples sorted by coating system

Two component repair material for SÄKAPHEN® Si 57 EG. Brown, matt.

SÄKAPHEN® Si 57 EG/RE is the Two Pack Repair Material for SÄKAPHEN® Si 57 EG. The coating is resistant to water vapor diffusion (ΔT 85 °C). The coating is chemically resistant to all types of water, including brackish, river and sea water, various substances ranging from sour to strongly alkaline.

Die Abbildungen dienen nur der grafischen Veranschaulichung und können vom Realbild abweichen.

   
   
   
   
   
   
   
   
   
   

 

SÄKAPHEN® Coating Si 57 EG/RE - Product Data

Properties - Cold Cured Duroplast Coating
Resin base - Amine cured Epoxy system
Cure Mechanism - Cold Cured Duroplast Coating
Quantity of components - 2
Color - Dark brown
Surface - MATT
pH Range pH 4 - 12
wet coating thickness in 1 layer µm 150
Total dry film thickness µm 300-350
Coverage at 1000µm approx. kg/m²/DFT 1,6 kg / m² / 350µm
Surface Preparation Sa SA2 ½ - SA 3
Surface Profile µm 40 - 60 µm
Temperature resistance dry (dry air oven) °C -20°C to +100°C
Temperature resistance wet (water) °C -20°C to +100°C
Resistance to water vapor diffusion °C ≤ ∆T 85°C
Overcoating Waiting Time hours/23°C 12-48
Chemical Curing days 8
Linear Thermal Expansion µm n/a
Pore testing Volts 67,5
Pendulum hardness acc. to König 6° sec 63
Shore D Hardness Shore D 84
Adhesion Test N/mm² [MPa] > 8
Salt spray test hours n/a
Impact Strength mm (1 kg) 1000
Surface smoothness (Ra) µm Ø 3 readings 2,18
Surface tension mN/m >35 <38
Abrasion resistance mg/1000 r. under examination
Crosscut class 1
Heat conductivity Ø 12,7x2,0mm on C-Steel with 67,37 w/mK W/mK n/a

 

Two component repair material for SÄKAPHEN® Si 57 E. Red, high gloss.

SÄKAPHEN® Si 57 E/RE is the two component repair material for SÄKAPHEN® Si 57 E. The coating has hydrophopic properties and an excellent adhesion to the substrate. The coating is chemically resistant to all types of water, including brackish, river and sea water as well as deionized water, various substances ranging from sour to strongly alkaline.

Die Abbildungen dienen nur der grafischen Veranschaulichung und können vom Realbild abweichen.
   
   
   
   
   
   
   
   
   
   

 

SÄKAPHEN® Coating Si 57 E/RE - Product Data

Properties - Cold Cured Duroplast Coating
Resin base - Amine cured Epoxy system
Cure Mechanism - Cold Cured Duroplast Coating
Quantity of components - 2
Color - Iron oxide red
Surface - Glossy
pH Range pH 1-13
wet coating thickness in 1 layer µm 150
Total dry film thickness µm 400-500
Coverage at 1000µm approx. kg/m²/DFT 1,2 kg / m² / 500µm
Surface Preparation Sa SA2 ½ - SA 3
Surface Profile µm 40 - 60 µm
Temperature resistance dry (dry air oven) °C -20°C to +120°C
Temperature resistance wet (water) °C -20°C to 70°C
Resistance to water vapor diffusion °C ≤ ∆T 30°C
Overcoating Waiting Time hours/23°C 8-24
Chemical Curing days 7-10
Linear Thermal Expansion µm n/a
Pore testing Volts 2000
Pendulum hardness acc. to König 6° sec 133
Shore D Hardness Shore D 84
Adhesion Test N/mm² [MPa] > 20
Salt spray test hours 1250
Impact Strength mm (1 kg) 550
Surface smoothness (Ra) µm Ø 3 readings 0,40
Surface tension mN/m >28 <35
Abrasion resistance mg/1000 r. under examination
Crosscut class 0
Heat conductivity Ø 12,7x2,0mm on C-Steel with 67,37 w/mK W/mK n/a

 

Two component repair material for SÄKAPHEN® Si 14 EG. Red, matt.

SÄKAPHEN® Si 14 EG/RE is the Two Pack Repair Material for SÄKAPHEN® Si 14 EG. The coating is resistant to water vapor diffusion (ΔT 85 °C). The coating is chemically resistant to all types of water, including brackish, river and sea water, various substances ranging from sour to strongly alkaline.

Die Abbildungen dienen nur der grafischen Veranschaulichung und können vom Realbild abweichen.
   
   
   
   
   
   
   
   
   
   

 

SÄKAPHEN® Coating Si 14 EG/RE - Product Data

Properties - Cold Cured Duroplast Coating
Resin base - Amine cured Epoxy system
Cure Mechanism - Cold Cured Duroplast Coating
Quantity of components - 2
Color - Dark brown
Surface - MATT
pH Range pH 4 - 12
wet coating thickness in 1 layer µm 150
Total dry film thickness µm 300-350
Coverage at 1000µm approx. kg/m²/DFT 1,6 kg / m² / 350µm
Surface Preparation Sa SA2 ½ - SA 3
Surface Profile µm 40 - 60 µm
Temperature resistance dry (dry air oven) °C -20°C to +100°C
Temperature resistance wet (water) °C -20°C to +100°C
Resistance to water vapor diffusion °C ≤ ∆T 85°C
Overcoating Waiting Time hours/23°C 12-48
Chemical Curing days 8
Linear Thermal Expansion µm n/a
Pore testing Volts 67,5
Pendulum hardness acc. to König 6° sec 63
Shore D Hardness Shore D 84
Adhesion Test N/mm² [MPa] > 8
Salt spray test hours n/a
Impact Strength mm (1 kg) 1000
Surface smoothness (Ra) µm Ø 3 readings 2,18
Surface tension mN/m >35 <38
Abrasion resistance mg/1000 r. under examination
Crosscut class 1
Heat conductivity Ø 12,7x2,0mm on C-Steel with 67,37 w/mK W/mK n/a