• SÄKAPHEN® SÄKAFLAKE® 900 WHITE

  • 1

PLURAL COMPONENT, VINYL ESTER EPOXY NOVOLAC-BASED ABRASION-RESISTANT AND WATER VAPOR-RESISTANT GLASS FLAKEFILLED COATING FOR STRONGLY ACIDIC TO STRONGLY ALKALINE MEDIA. WHITE, MATT.

SÄKAPHEN® SÄKAFLAKE® 900 White 3K is a plural component vinyl ester epoxy novolac-based abrasion-resistant glass flake-filled coating, resistant to water vapor diffusion (≤ ΔT 85°C).

The coating is chemically resistant against aggressive substances such as acids, bases, salt solutions, fluegas and all types of water, including brackish, river and sea water as well as deionized water.

The coating can be applied on-site.

The images are for illustration purposes only and may differ from the actual appearance of the products.

  Fields of application:
 

For the coating of chamber parts of heat exchangers, evaporators and air coolers, blowers, fans and compressor casings, flue gas funnels/channels, flue gas desulfurization equipment, wash towers, process and storage tanks, vessels and containers. For equipment requiring a coating resistant to water vapor diffusion also with high temperature gradients.

   
    Salt spray test: PDF download here
   
   
   
   
   
   

 

SÄKAPHEN® Coating SÄKAFLAKE 900 White - Product Data

Properties - Cold Cured Duroplast Coating
Resin base - Vinylester Epoxy-Novolac
Cure Mechanism - Cold Cured Duroplast Coating
Quantity of components - 3
Color - White
Surface - Matt rough
pH Range pH 1-12
Wet Film Thickness per layer µm 500 µm
Total dry film thickness µm 1500
Coverage approx. kg/m²/DFT 3,3 kg / m² / 1500µm
Surface Preparation Sa SA2 ½ - SA 3
Surface Profile µm 100
Temperature resistance dry (dry air oven) °C -20°C to +180°C
Temperature resistance wet (water) °C -20°C to 100°C
Resistance to water vapor diffusion °C ≤ ∆T 85°C
Overcoating Waiting Time hours/23°C min. 12 hours, max. Styrene test
Chemical Curing days 8
Linear Thermal Expansion µm n/a
Pore testing Volts 5000
Pendulum hardness acc. to König 6° sec n/a
Shore D Hardness Shore D 85
Adhesion Test N/mm² [MPa] 10 - 15
Salt spray test hours 1250
Impact Strength mm (1 kg) 1 Mon 450 / 6 Mon 900
Surface smoothness (Ra) µm Ø 3 readings 5,20
Surface tension mN/m >38 <41
Abrasion resistance mg/1000 r. under examination
Crosscut class 2
Heat conductivity Ø 12,7x2,0mm on C-Steel with 67,37 w/mK W/mK n/a