• Repair Material

  • 1

Two component repair material for SÄKAPHEN® Si 57 EG. Brown, matt.

SÄKAPHEN® Si 57 EG/RE is the Two Pack Repair Material for SÄKAPHEN® Si 57 EG. The coating is resistant to water vapor diffusion (ΔT 85 °C). The coating is chemically resistant to all types of water, including brackish, river and sea water, various substances ranging from sour to strongly alkaline.

Die Abbildungen dienen nur der grafischen Veranschaulichung und können vom Realbild abweichen.

   
   
   
   
   
   
   
   
   
   

 

SÄKAPHEN® Coating Si 57 EG/RE - Product Data

Properties - Cold Cured Duroplast Coating
Resin base - Amine cured Epoxy system
Cure Mechanism - Cold Cured Duroplast Coating
Quantity of components - 2
Color - Dark brown
Surface - MATT
pH Range pH 4 - 12
wet coating thickness in 1 layer µm 150
Total dry film thickness µm 300-350
Coverage at 1000µm approx. kg/m²/DFT 1,6 kg / m² / 350µm
Surface Preparation Sa SA2 ½ - SA 3
Surface Profile µm 40 - 60 µm
Temperature resistance dry (dry air oven) °C -20°C to +100°C
Temperature resistance wet (water) °C -20°C to +100°C
Resistance to water vapor diffusion °C ≤ ∆T 85°C
Overcoating Waiting Time hours/23°C 12-48
Chemical Curing days 8
Linear Thermal Expansion µm n/a
Pore testing Volts 67,5
Pendulum hardness acc. to König 6° sec 63
Shore D Hardness Shore D 84
Adhesion Test N/mm² [MPa] > 8
Salt spray test hours n/a
Impact Strength mm (1 kg) 1000
Surface smoothness (Ra) µm Ø 3 readings 2,18
Surface tension mN/m >35 <38
Abrasion resistance mg/1000 r. under examination
Crosscut class 1
Heat conductivity Ø 12,7x2,0mm on C-Steel with 67,37 w/mK W/mK n/a